| Model | Capacity(N㎥/min) | Dimension | Weight | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MAIN 37 |
PRE 32 |
LINE 31 |
COALESCER 13 |
ADSORBER 15 |
DxH(mm) | kg | ||||||
| 40㎛ | CART Q'TY |
5㎛ | CART Q'TY |
1㎛ | CART Q'TY |
0.01㎛ | CART Q'TY |
0.01PPM | CART Q'TY |
|||
| KWS20A | 5.7 | 1 | 3.5 | 1 | 2.8 | 1 | 1.9 | 1 | 1.9 | 1 | 300x450 | 15 |
| KWS25A | 8.0 | 1 | 5.7 | 1 | 5.6 | 1 | 3.4 | 1 | 3.4 | 1 | 300x500 | 20 |
| KWS40A | 14.0 | 1 | 12.0 | 1 | 11.0 | 1 | 10.0 | 1 | 10.0 | 1 | 300x700 | 25 |
| KWS50A | 26.0 | 1 | 24.0 | 1 | 22.0 | 1 | 14.0 | 1 | 14.0 | 1 | 300x850 | 30 |
| KWS65A | 58.0 | 2 | 49.0 | 2 | 48.0 | 2 | 28.0 | 2 | 28.0 | 2 | 500x1000 | 58 |
| KWS80A | 88.0 | 3 | 73.0 | 3 | 72.0 | 3 | 42.0 | 3 | 42.0 | 3 | 500x1000 | 60 |
| KWS100A | 139.0 | 5 | 120.0 | 5 | 110.0 | 5 | 70.0 | 5 | 70.0 | 5 | 600x1000 | 100 |
- Capacity is based on Inlet pressure of 7.0barG and differential pressure of 0.1barG.
- Standard design conditions are pressure of 9.7bar and temperature of 100°C. Special conditions exceeding the standard and filters of 100A or above are manufactured under consultation.
- Electrolytic polishing and attachment of manometer are optional
| Inlet Pressure(bar) | 2.0 | 2.9 | 3.9 | 4.9 | 5.9 | 6.9 | 7.8 | 8.8 | 9.8 | 10.8 | 11.8 | 12.7 | 13.7 | 14.7 | 15.7 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Correction Factor | 0.40 | 0.50 | 0.62 | 0.75 | 0.87 | 1.00 | 1.11 | 1.22 | 1.34 | 1.47 | 1.58 | 1.71 | 1.83 | 1.95 | 2.07 |
| Model | Capcacity (N㎥/min) |
Element Model & Q'TY |
Dimension(mm) DxH |
Weight (Kg) |
|---|---|---|---|---|
| KWM20A | 2.0 | 2MF20-100V(1) | 300x520 | 15 |
| KWM25A | 4.0 | 2MF20-100V(1) | 300x520 | 15 |
| KWM40A | 8.0 | 2MF20-300V(1) | 350x1080 | 40 |
| KWM50A | 12.0 | 2MF20-300V(1) | 350x1080 | 40 |
| KWM65A | 24.0 | 2MF20-300V(2) | 500x1350 | 150 |
| KWM80A | 36.0 | 2MF20-300V(3) | 500x1470 | 200 |
| KWM100A | 60.0 | 2MF20-300V(5) | 600x1470 | 250 |
- Capacity is based on Inlet pressure of 7.0barG and differential pressure of 0.1barG.
- Standard design conditions are pressure of 9.7bar and temperature of 100°C. Special conditions exceeding the standard and filters of 100A or above are manufactured under consultation.
- Standard filtration is 0.01㎛, and particle warrranty is below 10 particles. (0.1㎛/1CFM)
- STD. Materials : SUS316L(Housing/Cover/Bolts) EPDM(Gasket)
